A linear regulated power supply improves the sound quality for only X%.

A conventional linear power supply is only a part of the solution in order to create the perfect sound, therefore you will find all kinds of modifications on the market to modify the internal design of your audio device.… But we do not have to explain the downsides of internal modifications of your audio device, like: Internal modifications are expensive, you will lose your warranty guaranteed and in the worst case you will destroy your device completely... These are some major things you have to keep in mind before you start modifying.

Is the SBooster the missing link? We are not going to answer that question for you. We dare you to find it out for yourself with no risk at all. Replacing the switch-mode adapter for a high quality power supply is always a part of the deal when it comes to internal modifications. And now comes the good news, The “Best of Two Worlds Solution” is 100% guaranteed the best sounding linear power supply with the best price/quality ratio on the market and you will have the SBooster for free……

Tell us: do you still need internal modifications?

The SBooster is the best upgrade for high end linear regulated power supplies to make them ‘sound’ really High End¹

[<<Previous]

Ripple and noise of the power supply cause less quality in sound

Ripple and noise, why bother! Maybe you have seen them once, a nice print screen of an oscilloscope showing a straight line. The line indicates the output Voltage of a power supply, the line is straight so the output Voltage is perfect stabilized and the ripple and noise is extreme low.

If you want to reproduce music as close to the original recording, you need a power supply with a clean and stable output voltage. A good designed external power supply will meet those requirements if you measure and test the specification inside the power supply. But you have a 3-4 Feet DC power cord, it does not matter if the cable is cheap or extreme expensive, all types of cables come with a series resistance for free.

Audio devices, especially digital sources, have a very bad habit. The power consumption or current can fluctuate for more than 20% of the average power consumption. If you take the current fluctuation and you multiply it with the series resistance, you have calculated the fluctuation of the output voltage at the end of the cable. You may call this fluctuation “ripple and noise” or whatever you want. Fact is that the perfect stabilized output voltage inside the power supply is not that stable at all at the end of the DC power cord. The SBooster also solves this aspect, like many other aspects in order to reach the perfect sound.

[<<Previous] Page 2 of 3 [Next >>]

_______________________________________

¹We would be very pleased if you use our “Best of Two Worlds Solution” but If you have already a linear power supply you can upgrade your power supply with the SBooster for the same result.